Search
Browse Categories

     Recipes 

     How To  

Controller - Temp & Humidity

<< Previous in Equipment, Controls & Testers Next in Equipment, Controls & Testers >>
Price: $195.89
Item Number: AUBTH210

Plug-N-Play Temperature and Humidity Controller with Sensor

Can be used for sausage curing, cheese caves, green house and incubator applications. It can control both temperature (heating or cooling) and humidity (humidifying or dehumidifying) at the same time. It can display the temperature unit in either Celsius or Fahrenheit.

The controller has a two-line led display, two output sockets, one sensor module and one input power cord. The top display shows the measured temperature value, and the bottom display shows the measured humidity value. The left output socket is for heating/cooling device. The right output socket is for humidifier/dehumidifier. The included sensor module contains both temperature and humidity sensors.

Temperature:

  • Control range:  -40 to 80° C, -40 to 176° F
  • Resolution:  0.1° F (between -9.9 To 99.9° F) -   1° F (between -40 to -10° F, 100 to 176° F)
  • Accuracy:  0.5° F
  • Control mode: On/Off control - heating or cooling
  • Control output:  15A, 120V or 240V AC - Use the Relay and Power Adapter below if your device draws more than 15 amps  

Humidity

  • Control range:  0 to 99.9% rH
  • Resolution:  0.1% rH
  • Accuracy:  3% rH
  • Control mode: On/Off control humidifying or dehumidifying
  • Control output: 15A, 120V or 240V AC - Use the Relay and Power Adapter below if your device draws more than 15 amps  
  • Sensor cable length: 6 ft. - Power cable length: 3 ft.

Note:  This on/off controller will not hold the temperature as tight as a PID controller. If your system has a slow and delayed response, some temperature overshot is normal.
Although both temperature and humidity output can handle up to 15 amp of power, the combined total power of the two channels are limited to 15 amp due to the limitation of the input power cord.

The input power plug is a 120-volt NEMA 5-15P plug which will plug into any household receptable. The output socket is a 120-volt NEMA-15R standard U.S, household receptable.

* Input power: This unit will accept input power from 85 to 242 Volts AC and will supply the same output (85-242 Volts) to power your devices. Other words if you plug into 220 you will get 220 out, conversly if you plug into 110 you will get 110 out.   
 

To Download a Manual on this Controller  Click Here


Related Products

Relay - Solid State - 40 Amp - 3P
Price: $72.00
Relay - Solid State - 40 Amp - 3P
Adapter - Power - 9 Volt
Price: $15.00
Adapter - Power - 9 Volt

Product Reviews

(0 Ratings, 0 Reviews)
Shopping Cart
Your cart is empty.