|
Recipes
How To
|
Probe - Wall Mount - WS/WSD "G" Series
Chamber Probe - DIY
This sensor is designed to be mounted on the back wall of the smoke house and is used to monitor the temperature of the smoke house or chamber . Simply drill a 5/16” diameter hole on the back wall of the smoker
Fits "G" series WS and WSD Auber Controller - The model number will have G
Beginning in August 2020 the pin assignments were changed due to a new connector used with the SMD-200 and WSD-SMD-A control panel.
Cody's Tip - The original sensor had 1 black ring on the plug tip and then switched (August 2020) to 2 black rings on the plug tip. It has since switched back to a single black ring on the plug tip. So, we will ship a new wired connecter with all probes along with the current pin assignment Click Here.
Specification
- RTD Sensor type
- Temp Range -328 to 752 F, or -200 to 400 C
- Maximum mounting thickness, 1”(25 mm)
- Sensor tip dimensions: 5/32" diameter x ~3" long (4 mm x 80 mm )
- Sensor cable length, 6 ft (1.83 m) - 12 Ft. Optional
.
|
Product Options
| Length: |
|
| Version: |
|
|
Product Reviews
|
|
|